Sized for entries, storefronts, and low-traffic walls where a 120W or 150W pack throws more light than the space needs, this fixture lets you dial output between 15W, 20W, and 25W and pick a color temperature from 3000K to 5000K — all from the same part number. The photocell is built in, not a bolt-on accessory, so dusk-to-dawn control is ready the moment it's wired.
The housing is die-cast aluminum with a UV-stable bronze powder coat and a polycarbonate lens, built to shrug off direct sun and weather without fading or cracking. It's rated IP65 for wet locations and dims over a 0-10V line if the site runs controls. This model carries ETL listing only — it isn't DLC-listed, so it won't qualify for the utility rebate programs the 80W–150W packs do.
Part # L25WTUNWMCL12 (model CLW12-25W-H-TCP).
| Wattage | 15W / 20W / 25W (tunable) |
|---|---|
| Efficacy | 135 lm/W |
| CCT | 3000K / 4000K / 5000K (tunable) |
| CRI | >80 |
| Voltage | 120–277V |
| Power Factor | >0.9 |
| Beam Angle | 90° × 140° |
| Dimming | 0-10V |
| Photocell | Integrated |
| Housing | Die-cast aluminum alloy, bronze finish |
| Lens | Polycarbonate (PC) |
| IP Rating | IP65 — suitable for wet locations |
| Certifications | ETL Listed |
| Warranty | 5 years |
| Part Number | L25WTUNWMCL12 (model CLW12-25W-H-TCP) |
